Hello, I have a block of code that is quite repetitive, as it processes similar tasks across multiple datasets. To streamline this, I’m trying to create a macro, medpar_analyis to loop through the dataset  medpar for the years 2019 to 2021. However, when I run the macro, I encounter the following error:  ERROR 161-185: No matching DO/SELECT statement.  e error points to a specific line of code within the macro. Interestingly, when I run the same code for an individual dataset (e.g., medpar_2019), it compiles and executes without any issues. This leads me to believe the issue lies in how the macro handles loops or iterates over the datasets. I’m unsure where the unmatched DO loop or SELECT statement might be causing the error. Could you help identify the problem and suggest a solution?      %macro medpar_analysis; %do years=2019 %to 2021; data output.merged_medpar_mbsf_pdpn_&years._1; set output.merged_medpar_mbsf_pdpn_&years._1; array DGNS[25] $ DGNS_1_CD -- DGNS_25_CD; DEPRESSION_MEDPAR = .; NONALZH_DEMEN_MEDPAR = .; ALZH_MEDPAR = .; PNEUMO_MEDPAR = .; hf_medpar =.; PRKNSN_MEDPAR = .; STROKE_TIA_MEDPAR = .; ANXI_MEDICARE_MEDPAR =.; BIPOLAR_MEDPAR = .; TBI_MEDPAR = .; DRUGS_MEDPAR = .; SCHIOT_MEDPAR = .; OUD_ANY_MEDPAR = .; array depression_codes[50] $8 _temporary_ ('F0631', 'F0632', 'F310', 'F3110', 'F3111', 'F3112', 'F3113', 'F312', 'F3130', 'F3131', 'F3132', 'F314', 'F315', 'F3160', 'F3161', 'F3162', 'F3163', 'F3164', 'F3171', 'F3173', 'F3175', 'F3176', 'F3177', 'F3178', 'F3181', 'F3189', 'F319', 'F320', 'F321', 'F322', 'F323', 'F324', 'F325', 'F328', 'F3289', 'F329', 'F32A', 'F330', 'F331', 'F332', 'F333', 'F3340', 'F3341', 'F3342', 'F338', 'F339', 'F340', 'F341', 'F4321', 'F4323'); array nonalzhimers_codes[84] $8 _temporary_ ('F0150', 'F0151', 'F01511', 'F01518', 'F0152', 'F0153', 'F0154', 'F01A0', 'F01A11', 'F01A18', 'F01A2', 'F01A3', 'F01A4', 'F01B0', 'F01B11', 'F01B18', 'F01B2', 'F01B3', 'F01B4', 'F01C0', 'F01C11', 'F01C18', 'F01C2', 'F01C3', 'F01C4', 'F0280', 'F0281', 'F02811', 'F02818', 'F0282', 'F0283', 'F0284', 'F02A0', 'F02A11', 'F02A18', 'F02A2', 'F02A3', 'F02A4', 'F02B0', 'F02B11', 'F02B18', 'F02B2', 'F02B3', 'F02B4', 'F02C0', 'F02C11', 'F02C18', 'F02C2', 'F02C3', 'F02C4', 'F0390', 'F0391', 'F03911', 'F03918', 'F0392', 'F0393', 'F0394', 'F03A0', 'F03A11', 'F03A18', 'F03A2', 'F03A3', 'F03A4', 'F03B0', 'F03B11', 'F03B18', 'F03B2', 'F03B3', 'F03B4', 'F03C0', 'F03C11', 'F03C18', 'F03C2', 'F03C3', 'F03C4', 'F05', 'G138', 'G3101', 'G3109', 'G311', 'G312', 'G3183', 'G94', 'R4181'); array alzhimers_codes[4] $8 _temporary_ ('G300', 'G301','G308', 'G309');    do i = 1 to dim(DGNS); if not missing(DGNS[i]) then do; if strip(DGNS[i]) in alzhimers_codes then ALZH_MEDPAR = 1; end; end; /* Assign 0 to ALZH_MEDPAR for other diagnosis codes */ do i = 1 to dim(DGNS); if missing(ALZH_MEDPAR) then do; if strip(DGNS[i]) in depression_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in nonalzhimers_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in pneumonia_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in hf_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in prknsn_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in stroke_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in stroke_exclusion_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in anxiety_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in bipolar_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in TBI_codes then ALZH_MEDPAR = 0; if strip(DGNS[i]) in DRUG_USE_CODES then ALZH_MEDPAR = 0; if strip(DGNS[i]) in PSYCH_CODES then ALZH_MEDPAR = 0; if strip(DGNS[i]) in OUD_CODES then ALZH_MEDPAR = 0; end; end; /* Assign -9 to ALZH_MEDPAR if all DGNS values are missing */ do i = 1 to dim(DGNS); if missing(ALZH_MEDPAR) then do; if missing(DGNS[i]) then ALZH_MEDPAR = -9; end; end;   ... View more

Hello everyone,   We are trying to read the table having one variable type as clob into SAS but the length is truncating. We want to create a table from Oracle to sas work library.   Tried below options but didn't work : 1. Used pass through facility & created new table in Oracle. Changed the CLOB type to VARCHAR 2. Data step with new column creation & reading CLOB variable to it Data test; Length remarks1 $4000.; Set oradb.tbl; Remarks1 = remarks; Run;   3. Trying to print the Oracle table in sas, however remarks column is truncated. Proc print data= orada.tbl; run;   We found one option dbmax_text to use in libname statement. But will that work while creating the table in sas work library? Please suggest the solution so that we can create the table in sas work library & able to read clob variable without truncation.   Thanks in advance! ... View more

We are unable to start or check the status of services, and we are getting ‘killed’ as a response to every command query. Any suggestions on how we can fix these issues?       ... View more

Hi All,   one of the admin user has created row level condtions on multiple conditions but all of suddenly all the row level condtions been deleted . How to check why conditions has been deleted.   thanks in advance ... View more

You can ask using natural language instead of querying tables in SAS Viya. With Azure OpenAI Assistants API and function calling, you can ask questions directly from a Jupyter notebook. ... View more