Lauther/d4-embeddings-v3.0-tl
Sentence Similarity • 0.6B • Updated • 3
anchor stringclasses 608
values | pos stringclasses 24
values | neg stringclasses 24
values |
|---|---|---|
Orifice Diameter (mm) | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
prueba_gonzalo | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... |
Vazao Instantanea | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
FQI-4150.63122B | What is a Fluid?
A Fluid is the substance measured within a measurement system. It can be a gas or liquid, such as hydrocarbons, water, or other industrial fluids. Proper classification of fluids is essential for ensuring measurement accuracy, regulatory compliance, and operational efficiency. By identifying fluids cor... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
FQI-4301.4722A | What is a Meter Stream?
A Meter Stream represents a measurement system configured within a flow computer. It serves as the interface between the physical measurement system and the computational processes that record and analyze flow data.
Key Aspects of a Meter Stream:
- Status: Indicates whether the meter stream is ... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
K-Factor (pulsos/m3) | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... |
PRUEBA-ANGELO | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is a Measurement Unit?
A Measurement Unit defines the standard for quantifying a physical magnitude (e.g., temperature, pressure, volume). It establishes a consistent reference for interpreting values recorded in a measurement system.
Each measurement unit is associated with a specific magnitude, ensuring that va... |
GS-TAUBATE E | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
FQI-4715.0422A | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... |
Suzano systems | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... |
PTE LORENA B | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
PTE CAPUAVA A | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
FQI-4300.8722B | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... |
PTE UTE CUBATÃO (UTE EUZÉBIO ROCHA) B | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
PTE SÃO BERNARDO DO CAMPO B | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... | What is a Measurement Unit?
A Measurement Unit defines the standard for quantifying a physical magnitude (e.g., temperature, pressure, volume). It establishes a consistent reference for interpreting values recorded in a measurement system.
Each measurement unit is associated with a specific magnitude, ensuring that va... |
Ramal de Campos Elíseos 16" | What is a Measurement Type?
Measurement types define the classification of measurements used within a system based on their purpose and regulatory requirements. These types include **fiscal**, **appropriation**, **operational**, and **custody** measurements.
- **Fiscal measurements** are used for tax and regulatory ... | What is an Installation?
An Installation is a physical or operational site where measurement systems and equipment are deployed. These locations can include processing plants, industrial facilities, or other operational sites. Installations serve as key points for monitoring and managing measurement processes. Examples... |
PTE GUAPIMIRIM B | What is an Uncertainty Composition?
An Uncertainty Composition represents a specific factor that contributes to the overall uncertainty of a measurement system. These components are essential for evaluating the accuracy and reliability of measurements by identifying and quantifying the sources of uncertainty.
Key Aspe... | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... |
Mol (%) nonano | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... |
FQI-4150.21-031C | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What is a Calibration Record?
A Calibration Record documents the calibration process of a specific equipment tag, ensuring that its measurements remain accurate and reliable. Calibration is a critical process in maintaining measurement precision and compliance with standards.
Key Aspects of a Calibration Record:
- Cal... |
RAMAL 20 | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
Densidade base (kg/m3) | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
ETC SJC-GASTAU B | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... |
PTE UTE JUIZ DE FORA (IGREJINHA) A | What is an Uncertainty Composition?
An Uncertainty Composition represents a specific factor that contributes to the overall uncertainty of a measurement system. These components are essential for evaluating the accuracy and reliability of measurements by identifying and quantifying the sources of uncertainty.
Key Aspe... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
PTE RIO DAS FLORES A | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What is an Installation?
An Installation is a physical or operational site where measurement systems and equipment are deployed. These locations can include processing plants, industrial facilities, or other operational sites. Installations serve as key points for monitoring and managing measurement processes. Examples... |
Alarme baixa T3 | What is an Uncertainty Composition?
An Uncertainty Composition represents a specific factor that contributes to the overall uncertainty of a measurement system. These components are essential for evaluating the accuracy and reliability of measurements by identifying and quantifying the sources of uncertainty.
Key Aspe... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
GUARAREMA - SENTIDO RJ | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... |
Caraguatatuba - Taubaté (GASTAU) | What is a Measurement Type?
Measurement types define the classification of measurements used within a system based on their purpose and regulatory requirements. These types include **fiscal**, **appropriation**, **operational**, and **custody** measurements.
- **Fiscal measurements** are used for tax and regulatory ... | What is a Measurement Unit?
A Measurement Unit defines the standard for quantifying a physical magnitude (e.g., temperature, pressure, volume). It establishes a consistent reference for interpreting values recorded in a measurement system.
Each measurement unit is associated with a specific magnitude, ensuring that va... |
Massa especifica (P,T) | What is an Uncertainty Composition?
An Uncertainty Composition represents a specific factor that contributes to the overall uncertainty of a measurement system. These components are essential for evaluating the accuracy and reliability of measurements by identifying and quantifying the sources of uncertainty.
Key Aspe... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
PR Interconexão TAG A | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... |
differential pressure | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
PR Itaboraí B | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... |
PTE CUBATÃO A | What is a Meter Stream?
A Meter Stream represents a measurement system configured within a flow computer. It serves as the interface between the physical measurement system and the computational processes that record and analyze flow data.
Key Aspects of a Meter Stream:
- Status: Indicates whether the meter stream is ... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
PTE UTE IBIRITÉ (UTE AURELIANO CHAVES) A | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
TECAB GASDUC III B | What is a Meter Stream?
A Meter Stream represents a measurement system configured within a flow computer. It serves as the interface between the physical measurement system and the computational processes that record and analyze flow data.
Key Aspects of a Meter Stream:
- Status: Indicates whether the meter stream is ... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
Alarme alta P4 | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... |
FQI-1230119A | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... |
FQI-4300-44114 | What is an Uncertainty Composition?
An Uncertainty Composition represents a specific factor that contributes to the overall uncertainty of a measurement system. These components are essential for evaluating the accuracy and reliability of measurements by identifying and quantifying the sources of uncertainty.
Key Aspe... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
FQI-4150.63122B | What is a Measurement Type?
Measurement types define the classification of measurements used within a system based on their purpose and regulatory requirements. These types include **fiscal**, **appropriation**, **operational**, and **custody** measurements.
- **Fiscal measurements** are used for tax and regulatory ... | What is a Calibration Record?
A Calibration Record documents the calibration process of a specific equipment tag, ensuring that its measurements remain accurate and reliable. Calibration is a critical process in maintaining measurement precision and compliance with standards.
Key Aspects of a Calibration Record:
- Cal... |
FQI-4150.8422B | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... |
PTE REVAP II C | What is a Meter Stream?
A Meter Stream represents a measurement system configured within a flow computer. It serves as the interface between the physical measurement system and the computational processes that record and analyze flow data.
Key Aspects of a Meter Stream:
- Status: Indicates whether the meter stream is ... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
Limite Superior T | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
PTE SÂO JOSÉ DOS CAMPOS B | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
PTE REVAP II C | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
FQI-4150.21-031B | What is a Fluid?
A Fluid is the substance measured within a measurement system. It can be a gas or liquid, such as hydrocarbons, water, or other industrial fluids. Proper classification of fluids is essential for ensuring measurement accuracy, regulatory compliance, and operational efficiency. By identifying fluids cor... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
PTE PIRAI B | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... |
PTE RESENDE II B | What is a Fluid?
A Fluid is the substance measured within a measurement system. It can be a gas or liquid, such as hydrocarbons, water, or other industrial fluids. Proper classification of fluids is essential for ensuring measurement accuracy, regulatory compliance, and operational efficiency. By identifying fluids cor... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
Vol Liq MDR (Sm3) | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
FQI-4300.38-222B | What is a Measurement Type?
Measurement types define the classification of measurements used within a system based on their purpose and regulatory requirements. These types include **fiscal**, **appropriation**, **operational**, and **custody** measurements.
- **Fiscal measurements** are used for tax and regulatory ... | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... |
FQI-4150.6122A1 | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a client?
The cliente is basically the owner of every installation, platform, measurement system, flow computers. |
PTE JACUTINGA A | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
FQI-4155.2822B | What is a Meter Stream?
A Meter Stream represents a measurement system configured within a flow computer. It serves as the interface between the physical measurement system and the computational processes that record and analyze flow data.
Key Aspects of a Meter Stream:
- Status: Indicates whether the meter stream is ... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
PTE BRAGANÇA PAULISTA B | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
Caraguatatuba - Taubaté (GASTAU) | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... |
PTE REVAP II B | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
Mol (%) água | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
PTE UTE BAIXADA FLUMINENSE B | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
PTE PINDAMONHANGABA II B | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... | What is a Calibration Record?
A Calibration Record documents the calibration process of a specific equipment tag, ensuring that its measurements remain accurate and reliable. Calibration is a critical process in maintaining measurement precision and compliance with standards.
Key Aspects of a Calibration Record:
- Cal... |
PR GNL BG B | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
PTE TAUBATÉ B | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... |
Duque de Caxias A | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... |
Densidade linea (kg/m3) | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... |
Ramal de Campos Elíseos 16" | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a Calibration Record?
A Calibration Record documents the calibration process of a specific equipment tag, ensuring that its measurements remain accurate and reliable. Calibration is a critical process in maintaining measurement precision and compliance with standards.
Key Aspects of a Calibration Record:
- Cal... |
FQI-4150.81103 | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... |
PTE TERMORIO I (UTE GLB) C | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
PTE REGAP II B | What is a Measurement Type?
Measurement types define the classification of measurements used within a system based on their purpose and regulatory requirements. These types include **fiscal**, **appropriation**, **operational**, and **custody** measurements.
- **Fiscal measurements** are used for tax and regulatory ... | What is a client?
The cliente is basically the owner of every installation, platform, measurement system, flow computers. |
PTE TERMORIO II (CEG METROPOLITANO) C | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
FQI-4150.23-535 | What is a Fluid?
A Fluid is the substance measured within a measurement system. It can be a gas or liquid, such as hydrocarbons, water, or other industrial fluids. Proper classification of fluids is essential for ensuring measurement accuracy, regulatory compliance, and operational efficiency. By identifying fluids cor... | What is a Calibration Record?
A Calibration Record documents the calibration process of a specific equipment tag, ensuring that its measurements remain accurate and reliable. Calibration is a critical process in maintaining measurement precision and compliance with standards.
Key Aspects of a Calibration Record:
- Cal... |
flow computer tag | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... |
PTE RECAP II A | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is a Calibration Record?
A Calibration Record documents the calibration process of a specific equipment tag, ensuring that its measurements remain accurate and reliable. Calibration is a critical process in maintaining measurement precision and compliance with standards.
Key Aspects of a Calibration Record:
- Cal... |
PTE SÃO JOSÉ DOS CAMPOS B | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... |
PTE RECAP II B | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
PTE BRAGANÇA PAULISTA C | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... |
PTR GUAPIMIRIM B | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
PTE SÂO JOSÉ DOS CAMPOS B | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
PTR GUAPIMIRIM A | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
calibration span | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... | What is a Measured Magnitude Value?
A Measured Magnitude Value represents a **DAILY** recorded physical measurement of a variable within a monitored fluid. These values are essential for tracking system performance, analyzing trends, and ensuring accurate monitoring of fluid properties.
Key Aspects of a Measured Magni... |
PTE JACUTINGA B | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
FIT-4150.63122A | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is a Measurement Unit?
A Measurement Unit defines the standard for quantifying a physical magnitude (e.g., temperature, pressure, volume). It establishes a consistent reference for interpreting values recorded in a measurement system.
Each measurement unit is associated with a specific magnitude, ensuring that va... |
FQI-4301.4722B | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What is an Installation?
An Installation is a physical or operational site where measurement systems and equipment are deployed. These locations can include processing plants, industrial facilities, or other operational sites. Installations serve as key points for monitoring and managing measurement processes. Examples... |
Initial Density Value | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is an Installation?
An Installation is a physical or operational site where measurement systems and equipment are deployed. These locations can include processing plants, industrial facilities, or other operational sites. Installations serve as key points for monitoring and managing measurement processes. Examples... |
Flow (km3/d) | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... |
PTR GUAPIMIRIM A | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a Calibration Point?
A Calibration Point represents a specific data entry in a calibration process, comparing an expected reference value to an actual measured value. These points are fundamental in ensuring measurement accuracy and identifying deviations.
Key Aspects of Calibration Points:
- Calibration Repor... |
PTE JAPERI C | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
EDG CE - Ramal 16 - Injeção | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is an Installation?
An Installation is a physical or operational site where measurement systems and equipment are deployed. These locations can include processing plants, industrial facilities, or other operational sites. Installations serve as key points for monitoring and managing measurement processes. Examples... |
FQI-4150.63122C | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... |
ECOMP-GUARAREMA - BY-PASS | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... |
flow_computer_tag | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is a Fluid?
A Fluid is the substance measured within a measurement system. It can be a gas or liquid, such as hydrocarbons, water, or other industrial fluids. Proper classification of fluids is essential for ensuring measurement accuracy, regulatory compliance, and operational efficiency. By identifying fluids cor... |
PTE CUBATÃO II A | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... | What is a Calibration Record?
A Calibration Record documents the calibration process of a specific equipment tag, ensuring that its measurements remain accurate and reliable. Calibration is a critical process in maintaining measurement precision and compliance with standards.
Key Aspects of a Calibration Record:
- Cal... |
FIT-4150.63122C | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
Alarme baixa P2 | What is a Magnitude?
A magnitude/variable represents a physical magnitude measured by the system, such as temperature, pressure, or volume. It plays a crucial role in monitoring and analyzing system performance. Each variable has a status that indicates whether it is active (ACT) or inactive (INA), ensuring proper iden... | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... |
GASDUC III - CHEGADA | What is an Uncertainty Composition?
An Uncertainty Composition represents a specific factor that contributes to the overall uncertainty of a measurement system. These components are essential for evaluating the accuracy and reliability of measurements by identifying and quantifying the sources of uncertainty.
Key Aspe... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
FQI-4300.4501 | What is a Meter Stream?
A Meter Stream represents a measurement system configured within a flow computer. It serves as the interface between the physical measurement system and the computational processes that record and analyze flow data.
Key Aspects of a Meter Stream:
- Status: Indicates whether the meter stream is ... | What is a client?
The cliente is basically the owner of every installation, platform, measurement system, flow computers. |
Vazão média (m3/hr) | What is an Uncertainty Composition?
An Uncertainty Composition represents a specific factor that contributes to the overall uncertainty of a measurement system. These components are essential for evaluating the accuracy and reliability of measurements by identifying and quantifying the sources of uncertainty.
Key Aspe... | What are Flow Computer Types?
Flow computer types categorize different models of flow computers used in measurement systems, such as OMNI, KROHNE, ROC, FC302, S600, FLOWBOSS, F407, F107, and ThermoFisher. Each type is defined by its capabilities, functionalities, and applications, determining how it processes measureme... |
ECOMP-GUARAREMA - BY PASS | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... | What is an Equipment Class?
An Equipment Class categorizes different types of equipment based on their function or role within a measurement system. This classification helps in organizing and distinguishing equipment types for operational, maintenance, and analytical purposes.
Each Equipment Class groups related equi... |
PTE UTE MÁRIO LAGO D | What is a Flow Computer Firmware?
A flow computer firmware is a software component that defines the functionality and behavior of a flow computer.
🔹 Key Characteristics:
Each firmware version (e.g., F407, FB107, EMED-010) is linked to a specific flow computer model.
Firmware versions can have a status indicating whe... | What is Equipment?
An Equipment represents a physical device that may be used within a measurement system. Equipment can be active or inactive and is classified by type, such as transmitters, thermometers, or other measurement-related devices.
Key Aspects of Equipment:
- Serial Number: A unique identifier assigned to ... |
FQI-4300.8722B | What is an Equipment Tag?
An Equipment Tag is a unique label string identifier assigned to equipment that is actively installed and in use within a measurement system. It differentiates between equipment in general (which may be in storage or inactive) and equipment that is currently operational in a system.
Key Aspec... | What is uncertainty?
Uncertainty is a measure of confidence in the precision and reliability of results obtained from equipment or measurement systems. It quantifies the potential error or margin of error in measurements.
Types of uncertainty:
There are two main types of uncertainty:
1. Uncertainty of magnitudes (vari... |
Vazão Bruta | What is an Uncertainty Curve Point?
An Uncertainty Curve Point represents a data point used to construct the uncertainty curve of a measurement system. These curves help analyze how measurement uncertainty behaves under different flow rate conditions, ensuring accuracy and reliability in uncertainty assessments.
Key A... | What is a measurement system?
**Measurement systems** are essential components in industrial measurement and processing. They are identified by a unique **Tag** and are associated with a specific **installation** and **fluid type**. These systems utilize different **measurement technologies**, including **differential ... |
FQI-4301.4722B | What is a Fluid?
A Fluid is the substance measured within a measurement system. It can be a gas or liquid, such as hydrocarbons, water, or other industrial fluids. Proper classification of fluids is essential for ensuring measurement accuracy, regulatory compliance, and operational efficiency. By identifying fluids cor... | What is a report index or historic index?
Indexes represent the recorded reports generated by flow computers, classified into two types:
- **Hourly reports Index**: Store data for hourly events.
- **Daily reports Index**: Strore data for daily events.
These reports, also referred to as historical data or flow compute... |
ECOMP-GUARAREMA - BY-PASS | What are historical report values?
These represent the recorded data points within flow computer reports. Unlike the report index, which serves as a reference to locate reports, these values contain the actual measurements and calculated data stored in the historical records.
Flow computer reports store two types of d... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
PTE UTE JUIZ DE FORA (IGREJINHA) A | What is a flow computer?
A flow computer is a device used in measurement engineering. It collects analog and digital data from flow meters and other sensors.
Key features of a flow computer:
- It has a unique name, firmware version, and manufacturer information.
- It is designed to record and process data such as temp... | What is an Equipment Type?
An Equipment Type defines a category of measurement or monitoring devices used in a system. Each type of equipment is classified based on its function, the physical magnitude it measures, and its associated measurement unit.
Key Aspects of Equipment Types:
- Categorization: Equipment types i... |
End of preview. Expand in Data Studio
README.md exists but content is empty.
- Downloads last month
- 14